Provide specific solutions for the manufacturing of passenger ships, transportation ships, engineering ships, fishing ships, port ships, ocean development ships, and other ships.

Comprehensively solve the problems of traditional process complexity, poor accuracy, high loss, and serious pollution, and meet the industry's needs for high-precision and high plasticity.

keel

The main function of a ship's keel is to bear weight, which is the most important load-bearing structure for ships, especially small ships. It bears the longitudinal bending moment of the hull and ensures the structural strength of the ship.

Mainly used for cutting and processing of spherical flat steel.

Side keel

The side keel is a longitudinal component on both sides of the keel. It bears some longitudinal bending moments and improves the strength of the hull to withstand external forces.

Mainly for cutting and processing the required plates, T-beams, etc.

Dragon tendon

It is a longitudinal component on both sides of the ship's hull. It forms a mesh structure with the ribs to fix the ship's side panels and increase the structural strength of the hull.

Mainly used for cutting and processing of required profiles, T-beams, etc.

Head and tail columns

The bow and stern columns are installed at the bow and stern of the ship, respectively, and are connected to the keel below. They can enhance the ship's resistance to wave impact and water pressure, as well as withstand longitudinal collisions and vibrations caused by propeller operation.

Mainly used for cutting and processing the required plates, etc.

System management system

The function of this type of piping system is to ensure the unsinkability of the ship, fire safety, navigation performance, and meet the living needs of crew and passengers.

Mainly used for cutting and processing of bilge pipes, ballast pipes, fire pipes, air pipes, injection pipes, measurement pipes, water supply pipes, drainage pipes, and cabin ventilation pipes.

Power pipeline

The function of this type of piping system is to ensure the normal operation of mechanical equipment and is an important component of the entire power plant.

Mainly used for cutting and processing fuel pipes, oil pipes, seawater pipes, fresh water pipes, compressed air pipes, exhaust pipes, etc.