Laser cutting machine lens variety, such as focusing lens, protective lens and so on. But optical lenses in laser systems are consumable. In order to extend the service life of the laser cutting machine as much as possible and reduce the cost of use, the lens must be cleaned in strict accordance with this specification. During the replacement process, the placement, detection and installation of the optical lens should be paid attention to making the lens free from damage and contamination.

The following major laser briefly introduces the precautions and steps for correctly cleaning the lens of the laser cutting machine.

Precautions for correct cleaning of laser cutting machine lenses:

1. Be sure to wear finger gloves or rubber gloves to install the lenses.

2. Do not use sharp instruments to avoid scratching the lens surface.

3. When taking the lens, hold the lens edge to avoid contact with the film layer. The environment for testing and cleaning the lens must be dry and clean.

4. The workbench must maintain several layers of cleaning tissue and several cleaning lenses.

5. Do not talk over the camera, and keep potential contaminants (such as food, drinks, etc.) away from the work environment.

The procedure for correctly cleaning the lens of the laser cutting machine is as follows:

1. By blowing the balloon to blow the surface of the original part of the float.

2. Use analytical pure acetone to gently clean the lens. Cleaning should be completed at one time to avoid wavy tendons.

3. If acetone does not remove all dirt, wash with acid vinegar.

4. When contaminants and lens damage cannot be removed and removed, the only way to restore good performance is to replace the lens.

When using the machine, the lens should be correctly cleaned and operated, so that its life and performance will undoubtedly be significantly improved, which is also one of the ways to ensure the life and stability of the laser cutting machine, more prevention and maintenance can make the laser cutting machine work longer, higher stability, and bring more benefits to the manufacturer.